assembly cost
英 [əˈsembli kɒst]
美 [əˈsembli kɔːst]
网络 组装成本; 装配成本
双语例句
- A 3D printed bobblehead costs$ 30 compared with versions made on an assembly line that cost around$ 12.
一个3D打印的摇头娃娃价格为30美元，而流水线生产的同类产品价格约为12美元。 - Study of Characteristic Mapping Technology in Design of Assembly Cost
装配成本设计中特征映射技术的研究 - The sport flying disc has easy assembly, low cost, high safety factor and no site limitation.
该运动飞碟组装方便，成本低，安全系数高，不受场地限制。 - Low assembly cost, suit for automatic SMT;
装配成本低，并与自动装配设备匹配； - The comparison of these two heat exchangers were conducted from the fields of design, manufacture, assembly and cost etc.
从设计、制造、拆装和造价等方面对两种换热器作了对比；并对其适用的工况提出了建议。 - The utility model has the advantages of stable operation, easy assembly and cost saving, and the length of a table is not increased.
本实用新型的优点是不加长机台长度，工作稳定，组装容易，节约成本。 - The utility model has the advantages of convenient assembly, low cost, long service life, and large opening range.
本结构便于装卸，成本低，寿命长，开口范围大。 - Estimation on Assembly Cost of Product Design in Technology Stage
产品装配成本在技术设计阶段的估算 - The utility model has the advantages of high driving efficiency, simple structure, convenient assembly and manufacturing, low cost, small contact stress, big absorbing load, etc.
本实用新型具有传动效率高，接触应力小，承受载荷大，结构简单，制造、装配方便，成本低廉等优点。 - Main advantages of this structure: the main axis of the processing and assembly of simple, low cost.
这种主轴结构的优点：主轴的加工和装配简单，造价较低。 - In the face of rising domestic labour costs, many companies moved their manufacturing and assembly operations to low labour cost countries, especially China.
面对国内劳动力成本的不断上涨，许多企业将制造和组装生产线移到了一些劳动力成本更低的国家，特别是中国。 - Through practical test in field, the life of the packing box assembly is extended and the cost of water injection is saved.
通过现场试验证明.延长了填料盒总成的使用寿命，大大节约了注水成本.取得了较好的经济效益和社会效益。 - The utility model has the characteristics of low processing and assembly precision requirements, and low cost.
具有加工、装配精度要求不高，成本低的特点。 - Research on assembly cost evaluation for assembly sequence planning
面向装配序列规划的装配成本评价研究 - The novel radioactive heater-crucible assembly has advantages of low cost and high heating efficiency and can be applied widely to many fields, such as vacuum physics tests, teaching demonstration and relevant R& D applications.
其制作成本低，加热效率高，同时又提高了设备功效，是一种多功能辐射式加热器。在真空物理实验、教学和相关科研中有着广泛的应用前景。 - The Research of Xi'an Aero-engine ( Group) Ltd. Assembly Line Quality Cost Management
西航公司总装生产线质量成本管理研究 - On the basis of analysis for the collaborative commodity design process, the cost calculating strategies for the existing components, non-existing components, and the assembly cost calculation are put forward.
在对协同商品设计过程进行分析的基础上，给出了概念方案成本计算中的制成件成本计算策略、待制件成本计算策略，以及装配成本计算策略。 - Assembly is the end of manufacture process, assembly quality affect product's performance in high degree, and assembly cost is a big part of the manufacture cost.
装配是制造过程的最后环节，装配质量在很大程度上影响产品的性能，装配成本在制造成本中占有较大的比重。 - Assembly line develop quality cost management deeply and efficiently, and increase their economic benefit.
本文以西航公司总装生产线如何深入有效地开展质量成本工作、提高经济效益为目标。 - To reduce assembly cost and coordinate all these subsystems, the chassis integrated control is the trend.
为了减少装车成本使各系统之间协调工作，整个底盘系统有集成化控制的趋势。 - A Method for Estimating Product Assembly Cost Based on Neural Networks
基于神经网络的产品装配成本的估算方法的研究 - The result shows that the ANN model is far better than the regression model in assembly cost estimation. This method can provide information about the product cost for the designer to control the cost effectively.
该方法为设计人员提供了成本方面的决策依据，达到了产品最终成本的有效控制，在产品装配成本的估算中是正确和有效的。 - An assembly cost evaluation model for assembly sequence planning is proposed, in which the assembly cost is based on the changing times of assembly direction during assembling process and the total motion uncertainty degree of parts.
针对装配序列的特点提出了一个装配成本评价的模型，认为装配成本与产品装配过程中装配方向的变化次数，产品组成零件装配后的运动不确定度总和有关。 - A case study of front floor assembly was conducted to illustrate that the proposed VP-based framework could effectively reduce auto-body assembly design cost and shorten development period.
初步实践认为，该集成框架可对缩短装配开发周期、降低车身试制费用提供有效支持。 - High polymeric material and special process of manufacturing and assembly make it cost low even in the condition of single-piece work or low volume work.
高分子聚合物材料和特殊的加工装配工艺使得微泵即使在小批量单件生产的情况下成本依然低廉。 - In the design customization level, we studied similar component cost, manufacturing cost in feature-based design and assembly cost by applying fuzzy logic approach to assembly sequence.
针对设计定制中需要重新设计的零部件，进行了类似零件成本、制造成本和装配成本的估算。 - This artificial production method has the problem such as unstable assembly quality, low assembly efficiency, high cost and so on.
这种以人工装配为主的生产方式存在着装配质量不稳定、装配效率低、成本高等问题。 - When manufacturers and suppliers signing assembly parts supplying contracts, the assembly parts 'target cost made by manufacturers, as an important constraint condition, influences the main decision variables in contracts.
在制造商和供应商签订零部件的供应契约时，制造商制定的零部件目标成本作为一个重要的成本约束条件，影响契约中主要决策变量的确定。 - Assembly is an important part during the construction process for assembly sequence has a direct impact on the shipbuilding cycle, assembly quality and construction cost.
船舶构件装配是船舶建造过程的重要部分之一，建造过程中装配序列的好坏直接影响到装配质量的好坏、建造成本的高低和建造周期的长短。 - According to statistic, 60%-70% parts in vehicle are produced by stamping process. The quality of deformed sheet will influence assembly, appearance and manufacturing cost, developing recycle of new vehicle.
据有关统计，汽车上60%-70%的零件是采用冲压工艺生产出来的，汽车冲压件成形质量的好坏，不仅影响到整车装配、汽车外观，更影响到汽车的制造成本以及新车型的开发周期。